(PRWEB) May 01, 2014
3D bioprinting constitutes a raft of technologies, commercial and not-yet commercial, which have the potential to significantly impact a number of major markets, including in vitro testing for more efficient drug discovery and toxicity testing of personal consumer products, as well as the clinical fields relating to implant/grafting of human tissue. Though not yet employed within its addressable markets (current bioprinter sales and products are to research and development organisations only), the potential for rapid deployment in some areas already exists, subject to adequate funding being made available.
Browse Full Report With TOC:
Drug discovery is a highly expensive process which in most cases will end in failure to gain regulatory clearance (see figure 1). The reason for this high failure rate is related to the lack of sufficiently accurate pre-clinical (prior to human volunteer) testing methodologies which have to date been limited to 2-dimensional human cell assays together with animal testing.
Table of Contents
1. EXECUTIVE SUMMARY
3.1. Inkjet based bioprinting
3.2. Syringe/extrusion based bioprinting
3.3. Magnetic levitation bioprinting
3.4. Laser assisted bioprinting
3.5. Valve-based bioprinting
3.6. Technology summary
To Downlaod Full Report With TOC:
4.1.1. Drug screening
4.1.2. Regenerative medicine
4.1.3. Tissue replacement (avascular)
4.1.4. Tissue replacement (vascular)
4.3. Consumer/personal product testing
4.5. Food and animal product bioprinting
5.1. Market structure and key players
5.2. Value chain
5.3. Market barriers
6. ROADMAP AND FORECASTS
7. COMPANY INTERVIEWS
7.1. Digilab Inc.
7.2. MicroFab Technologies Inc.
7.3. n3D Biosciences Inc.
7.4. nScrypt Inc.
China Automotive Starter Industry Report, 2014-2017
Browse Full Report With TOC: http://www.marketresearchreports.biz/analysis-details/china-automotive-starter-industry-report-2014-2017
According to Sino Market Insight’s China Automotive Starter Industry Report, 2014-2017, it can be predicted that automotive starter market under the influence of vehicle market will enter a period of sluggish growth over the next few years, with estimated market size of 32.4831 million sets in 2017.
In 2013, China's auto market achieved more-than-expected growth, of which the production rose 14.82% YoY to 22.13 million and sales volume climbed 13.94% YoY to 21.99 million. Automotive starter as an integral part of the car witnessed accompanying growth in OEM market size, reaching 22.13 million. On the other hand, after-sales repair & replacement constitutes another big market for automotive starter requirements. With the swelling base of Chinese car ownership, starter replacement market still shows a growing trend. By 2013, aftermarket size has amounted to 1.2604 million sets, presenting a year-on-year increase of 12.0%.
To Downlaod Full Report With TOC: http://www.marketresearchreports.biz/sample/sample/196161
At present, major starter manufacturers in China are Shanghai Valeo Automotive Electrical Systems Co., Ltd., Jinzhou Halla Electrical Equipment Co., Ltd., Tianjin DENSO Engine Electrical Products Co., Ltd., Wuhu Generator Automotive Electrical Systems Co., Ltd., Wuxi Minxian Vehicle Electric Equipment Co.,Ltd, etc..
Among them, Shanghai Valeo, a joint venture company invested by Huayu Automotive Systems Co.,Ltd.(HASCO) which is affiliated to Shanghai Automotive Industry Corporation Group (SAIC) and Valeo International Holding B.V, France, specializes primarily in the manufacturing of cars, light-duty trucks as well as generators and starters equipped in diesel engines, with capacity expected to be 15 million sets in 2015. As of end-2013, the company’s main supporting customers have included Shanghai Volkswagen (Passat, Tiguan, Lavida, etc,), Shanghai General Motors (Buick, Sail, Cruze, etc,), FAW-Volkswagen (Bora, Audi, Golf, etc.), Beijing Hyundai (Elantra/Avante, Verna, etc.) and more.
China Vehicle Diesel Engine Industry Research Report, 2014-2017
Browse Full Report With TOC: http://www.marketresearchreports.biz/analysis-details/china-vehicle-diesel-engine-industry-research-report-2014-2017
China Vehicle Diesel Engine Industry Research Report, 2014-2017" estimates that China vehicle diesel engine market will keep an AAGR of 6% from 2014 to 2017 and the total sales volume will be close to 4.5 million sets.
With growth of commercial vehicle output in 2013, vehicle diesel engine market has warmed up with the annual output reaching 3.563 million sets, increasing 7.3% YoY but still below 3.936 million sets in 2010 and 3.59 million sets in 2011. in January-February, 2014, China vehicle diesel engine output was 648,467 sets, representing an increase of 8.2% over the same period in 2013.
In 2013, there were 21 vehicle diesel engine manufacturers in China, and the TOP five were Guangxi Yuchai, Weichai Power, Anhui Quanchai Engine, FAW Group and Jiangling Motors. Among them, Weichai Power sold 516,000 sets of vehicle diesel engines in 2013, surging 98.7% YoY, standing at 14.5% of sales volume of the whole industry. It enjoyed the highest growth rate of sales volume among all vehicle diesel engine manufacturers. Weichai Power's rapid rise in sales volume benefited from the substantial increase of truck sales of its major client --Foton Daimler.
To Download Full Report With TOC: http://www.marketresearchreports.biz/sample/sample/196163
In 2013, Weichai Power achieved revenue of RMB 58.31 billion, a year-on-year increase of 21% YoY and net income of RMB 3.82 billion, up 18% YoY.
In 2014, the National IV Diesel Engine Emission Standards are being widely implemented, the installation rate of China's high-pressure common rail engine will increase from 30% in 2013 to 60%-70%. As it enjoys greater superiority in high pressure common rail engine technology, in 2014 Weichai’s sales volume of diesel engine are expected to be further improved.
Marketresearchreports.biz is the most comprehensive collection of market research reports. Marketresearchreports.biz services are especially designed to save time and money of our clients. We are a one stop solution for all your research needs, our main offerings are syndicated research reports, custom research, subscription access and consulting services. We serve all sizes and types of companies spanning across various industries.
Office: United States
90 State Street, Suite 700
Albany, NY 12207
To Read complete Report With TOC: http://www.marketresearchreports.biz/analysis/196167