Master Bond Develops New Low Viscosity, Two-Component Epoxy Is Optically Clear with Non-Yellowing Properties
Hackensack, New Jersey (PRWEB) June 23, 2014 -- Master Bond EP112LS is a two-part epoxy that is well-suited for impregnation, potting, encapsulation, sealing, and coating applications, particularly in the aerospace and optoelectronics industries.
EP112LS is optically clear, features reliable non-yellowing properties, and has a refractive index of 1.55. This electrically insulative system is resistant to chemicals, including water, oils, fuels, acids, and bases. EP112LS is serviceable over the temperature range of -60°F to +450°F.
This system features a working life exceeding 2-3 days at room temperature and requires oven-curing. Post-curing will enhance its properties. With a mixed viscosity of 50-200 cps, EP112LS bonds well to a wide variety of substrates, including metals, composites, glass, ceramics, and many rubbers and plastics. Bonds feature a tensile strength, compressive strength, and tensile modulus of 11,000 psi, 20,000 psi, and 400,000 psi at room temperature, respectively. Dimensional stability is outstanding.
EP112LS has a shelf life of one year in original, unopened containers, and is available in ½ pint, pint, quart, gallon, and 5 gallon container kits.
Master Bond Electrically Insulative Adhesive Systems:
Master Bond 112LS is an optically clear, low viscosity epoxy that has been formulated for a variety of high performance applications. This two-component, heat-curing system is also a competent electrical insulator, even at elevated temperatures. Read more about Master Bond’s electrically insulative adhesives at http://www.masterbond.com/properties/electrically-insulative-adhesive-systems or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: technical(at)masterbond(dot)com.
Jane Trager, MasterBond, http://www.masterbond.com, 201-343-8983, [email protected]
Share this article