Cross-Hole Deburring and Internal Cleaning: BRM Announces Technical Article; Explains How to Select Twisted-in-Wire Brushes

Brush Research Manufacturing (BRM), Made in the USA maker of flexible honing tools and a full line of industrial brushes, announces technical resource that explains how to select twisted-in-wire brush tools. On-line article describes twisted-in-wire brush types and product specifications for cross-hole deburring tools, thread cleaning brushes, and tube and flue brushes.

Los Angeles, CA (PRWEB) June 25, 2014

Brush Research Manufacturing (BRM), global supplier of surface finishing and deburring tools, is announcing a technical article called How to Select Twisted-in-Wire Brushes. The Made in America manufacturer examines the four major categories of twisted-in-wire brushes, and describes Series-level products in each category.

Twisted-in-wire brushes are used for cross-hole deburring, the process of removing burrs from the intersections of cross-drilled holes. These industrial brushing tools are also used for removing soot and carbon deposits from pipes, and for cleaning holes, threads, and flues. Twisted-in-wire brushing tools can internally clean and deburr hard-to-reach places, making them important surface finishing tools.

Cross-Hole Deburring Tools and Thread Cleaning Brushes

As BRM’s new technical article explains, cross-hole deburring tools can have metal or abrasive-filled nylon filaments, and are available in small diameters. For example, Series 81-A brush tools feature an all-stainless steel construction and come in sizes as small as .024”. Series 81-AY twisted-in-wire brushes, and Series 85 deburring brushes for closed holes, complete the cross-hole deburring tool category.    

Thread cleaning brushes, another type of brush tool described in BRM’s on-line article, are used for cleaning pipe threads. Butterfly-type twisted-in-wire brushes are available for popular screw threads, and can be used also with tapered screw threads. BRM Series 83 industrial brushes can clean threads and remove burrs, scale, and rust.

Flue Brushes and Tube Brushes

BRM’s technical resource also explains how flue brushes are used for removing soot and carbon deposits from pipes, and for cleaning tube sheets. Available for various bore sizes, flue brush tools differ in terms of filament type and stem construction. Typically, pipe nipples are attached to these brush tools, which are designed for the internal cleaning of flues.

As BRM’s article also explains, the American manufacturer supplies various types of tube brushes. Some are designed for blind holes and bottom ends, while others are suitable for either powered operation or manual use. Tube brushes that are cut for power are used for tube cleaning, de-scaling, and rust removal.

Click here to read BRM’s new on-line article, How to Select Twisted-in-Wire Brushes.

About Brush Research Manufacturing

Brush Research Manufacturing (BRM), maker of flexible honing tools and nylon abrasive brushes, is located in Los Angeles, California. For 55 years, we’ve been solving difficult finishing problems with brushing technology. BRM’s Flex-Hone® tool is the standard against which all other cylinder hones are compared. For outer diameter (OD) deburring and surface finishing, choose NamPower brush tools.

Today, BRM is a full-line manufacturer of industrial brushes with an ISO 9001:2008 certification and a global network of distributors. Most of our products are made in the USA, and we proudly employee 75 workers here in Los Angeles. Through their hard work and commitment to quality, BRM now supplies hundreds of distributors across the U.S. and exports brush technologies to over 50 countries worldwide.

Media Contact:

Heather Jones
Director of Marketing
Brush Research Manufacturing Co. Inc.
4642 Floral Drive
Los Angeles, CA 90022

For Immediate Release:
Ph: (323) 261-2193



BRM Line Card - Flexible Hones and Industrial Brushes BRM Line Card - Flexible Hones and Industrial Brushes

BRM Line Card - Flexible Hones and Industrial Brushes