Uniweld Proudly Presents the RHT83 Series Two Stage Regulators, for Medium & Heavy Duty Projects
Fort Lauderdale, FL (PRWEB) July 30, 2014 -- Uniweld’s RHT83 Series regulators are the perfect build for medium and heavy duty workloads. These two stage regulators are comprised of a machined brass body and polished chrome bonnet on a heavy duty mechanical stem type seat and nozzle assembly. The easy-to-read signal scale 2-1/2 inch gauges make monitoring PSI a simple task.
When a constant delivery pressure is critical, Uniweld’s RHT83 Series two stage regulators will provide a constant supply pressure, regardless of the droops and variations that commonly occur with single stage regulators, due to variations in supply pressure when supply pressure decreases as the cylinder contents empties. The RHT83 series, eliminates the need to for periodic adjustments in delivery pressure.
The RHT83 Series also contains a 1-5/8 inch tri-layered reinforced neoprene diaphragm for the first stage and a 2 inch tri-layered reinforced neoprene diaphragm for the second stage.
A delrin bushing is used for smooth flow adjustment, while the fine mesh filter screen between inlet and seat keeps your system clear of debris. With safety in mind, Uniweld provides the RHT83 two stage regulator series with a pressure relief device for low pressure gauge protection.
Additional Product Information:
Depth: 8-1/4”
Width: 7-1/4”
Height: 6”
Weight: 4 lbs.
Maximum Flow - 1500 SCFH
Free Air @ 70 °F
No Flow Restrictions
Frank Vargas, Uniweld Products, Inc., http://uniweld.com, +1 1-800-323-2111 Ext: 1216, [email protected]
Share this article