New Bonomi Lead-Free Sweat-End Brass Check Valves: Fast, Bubble-Tight Shutoff With Simple Traditional Soldering

Share Article

High-temperature solders are not needed with new Bonomi 100712LF Series sweat-end lead-free brass check valves. Bodies and brass components are forged from a lead-free brass alloy that makes these in line check valves lighter, stronger and easier to install with traditional materials and methods.

Safe Water Drinking Act, SWDA, lead-free valves, lead free brass, in line check valves, plumbing, high-temperature solder

Bonomi Lead-free brass sweat-end check valves use traditional soldering methods and materials.

...meeting all requirements of the Safe Drinking Water Act (SDWA), California AB1953 and other individual state regulations.

New Bonomi 100712LF Series sweat-end lead-free brass check valves feature a spring-loaded soft seat for fast action and bubble-tight shutoff at both high and low pressures. They install without special handling or high-temperature solders because the valve bodies are made without lead-substitute additives such as bismuth or silicon.

The Bonomi 100712LF features a forged lead-free brass body that is stronger and lighter than sand-cast valve bodies with zero porosity. All brass components are made from brass alloy CW510L/ASTM C28500 which contains no bismuth, thus preventing stress cracking. It also contains no silicon, which increases resistance to heat.

The absence of silicon allows sweat-end connections on Bonomi valves to be made with traditional soldering methods and materials while still meeting all requirements of the Safe Drinking Water Act (SDWA), California AB1953 and other individual state regulations. The Bonomi 100712LF Series is approved for low leaded service under NSF-61 ANNEX F&G and NSF/ANSI 372.

The valve’s polyetherimide disc is abrasion and corrosion resistant. It is suitable for a wide temperature range, from +10˚ to 210˚F. The patented disc to interior body design prevents potential side loading common to other check valve styles. The elastomeric seat and interior body design create a flow pattern with high flow capacity and low pressure loss. The seat spring is made from stainless steel with a cracking pressure of .5 PSI.

Sizes from 1/2” to 2” FXF sweat accommodate a wide range of system requirements. Maximum working pressure is 200 WOG.

About Bonomi

Bonomi North America has served the U.S. and Canada since 2003 and is part of the Bonomi Group of Brescia, Italy. Bonomi Group brands include Rubinetterie Bresciane Bonomi (RB) brass ball valves and check valves; Valpres carbon and stainless steel ball valves; and Valbia pneumatic and electric industrial actuators. Bonomi North America maintains an extensive distribution network for these products from its headquarters in Charlotte, N.C. and a facility in Oakville, Ontario, Canada.

For more information on Bonomi 100712LF or other Bonomi lead-free products, contact Bonomi North America at (704) 412-9031 or visit http://www.bonominorthamerica.com.

[end]

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Rick Wentzell
Bonomi North America, inc.
+1 (704) 412-9031 Ext: 4
Email >
Visit website