Uniweld Recaps Chillventa 2014 HVAC International Trade Fair In Nuremberg, Germany
Fort Lauderdale, FL (PRWEB) October 31, 2014 -- Chillventa 2014 HVAC/R technicians witnessed the introduction of the new EZ Turn™ Anti-Blowback Hose! This innovative product was introduced in Europe at the Chillventa 2014 Exhibition in Nuremberg, Germany. The introduction was made with a live demo which challenged the EZ Turn™ Anti-Blowback Hose against any style hose currently being used in the industry. HVAC/R technicians whom took the challenge, were very excited about the newly introduced innovation.
HVAC/R technicians often experience that when connecting a standard hose nut to an access fitting, the valve core is depressed and the pressure from the system is released, spraying harmful refrigerant directly onto the technician’s hand and many times causing finger burns. This extreme pressure pushes back on the nut and causes a large amount of friction between the threads, making the nut very difficult to fully seat against the access fitting and provide unrestricted flow. Many times pliers are required to turn the nut and complete the seal. The EZ Turn™ Anti-Blowback fitting has a thrust bearing that reduces friction so the service hose can be easily connected to the access fitting while under pressure. This becomes extremely useful when working with a high pressure R-410A system.
The compact design of the EZ Turn™ Anti-Blowback Hose allows it to fit in tight work spaces and the deep square knurling gives the user complete finger-tip control. It has an orange and blue colored band around the hose nut to set it apart from the rest and make it easily recognizable. The hoses can be purchased individually, as a set of three, as a set of three bundled with manifold, or, if you already own hoses, EZ Turn™ Adaptors are available to convert any hose to an EZ Turn™ Hose.
Uniweld Products, Inc. also exhibited its newly introduced NV1 NitroVue™ Nitrogen Flow Indicator which simplifies the the HVAC/R technician’s ability to purge HVAC/R systems as well as to optimize nitrogen flow when brazing copper tubes. With new requirements from OEM’s to purge system at higher pressures, the newly introduced RHP800 nitrogen regulator was also well received, which will deliver pressure of up to 800 PSI.
Since its first appearance at the January 2014 AHR Expo in New York, the EZ Turn™ Anti-Blowback Hose has seen a great response from everyone that has taken the “EZ Turn Challenge!” Be on the lookout for these truly revolutionary hoses at your local distributor. Anyone who happens to see an “EZ Turn Challenge!” demo stand in a store is encouraged to grab their own hose and put it to the test. The EZ Turn™ Anti-Blowback Hose is sure to impress and will prove to be yet another one of Uniweld’s “Quality Tools That Go To Work With You®”.
Frank Vargas, Uniweld Products, Inc., http://uniweld.com, +1 1-800-323-2111 Ext: 1216, [email protected]
Share this article