Victrex Launches Composites Designed for Aerospace: “VICTREX® AE250” Product Family Delivers New Level of Efficiency
Thornton Cleveleys (UK) (PRWEB) October 20, 2015 -- The leading global PAEK*-based solutions provider, Victrex, is launching composites for the Aerospace industry in the form of unidirectional (UD) tape and laminate panels. Introduced under the brand “VICTREX® AE250 composites”, the new product group enables the production of continuously-reinforced components that can perform under load. Such components include brackets, clips, clamps, and housings used throughout the aircraft in primary and secondary structures. The development and launch builds on the hybrid moulding technology released in 2014 and also serves as proof that Victrex is moving forward in the supply chain to provide enhanced solutions.
One compelling advantage of implementing a PAEK-based composite solution is faster manufacturing as a result of smarter designs, contributing to cost savings and improved installation times. VICTREX AE250 composites have also shown weight savings of up to 60 per cent under certain circumstances when compared to metals such as aluminium, stainless steel and titanium. That weight reduction translates directly into significant gains in fuel-efficiency and reduced CO2 emissions. The composites have also shown an up to 5x higher specific strength compared to those of metals.
“Victrex sees this as another excellent opportunity to support our customers by being a total solutions provider,” noted Tim Herr, Aerospace Director at Victrex. “Our innovative PAEK composites, paired with the revolutionary hybrid moulding technology, bridge the gap between composites and injection moulding. It enables the manufacture of complex composite parts which have not been possible until now.”
Enabling hybrid moulding and reduced cycle times
With VICTREX AE250 composites being used as inserts in existing injection moulding equipment, the hybrid moulding process enables the overmoulding of a continuously-reinforced thermoplastic composite with VICTREX® PEEK injection moulding polymers.
The hybrid moulding technology offers major advantages, including improved cycle times, lower energy requirements, and the elimination of scrap and secondary operations. These factors help to reduce total system cost, a high priority in the industry's effort to move planes off the assembly line faster and more cost-effectively. Analysts believe that more than 35,000 new aircraft will be needed over the next 20 years in order to replace ageing fleets and to meet civilian flight demands.
“One key to achieving this is the replacement of metals and thermosets with next-generation thermoplastic solutions. When Victrex collaborates with our customers from concept to final part, they are able to achieve an unmatched combination of cost reductions, weight savings, design freedom, strength and production speed for next-generation thermoplastic components. All of these are becoming increasingly valuable to both the air-framers and tier suppliers alike," explains Tim Herr.
Reaching new heights of performance
Compared to thermoset solutions, PAEK composites can be processed faster, using out-of-autoclave methods, and are 100% recyclable. They have better damage tolerance than thermosets and offer greater chemical resistance, fatigue performance and FST (flame/smoke/toxicity) properties, while matching the strength and stiffness of thermosets. In comparison to metals, corrosion resistance, processing speed and thermal insulation are improved, while impact resistance and damage tolerance will be similar.
The key features of the VICTREX AE250 composites also include outstanding high-temperature performance and thermal stability, a wide-ranging chemical resistance to aerospace fluids and gases, and excellent resistance to hydrolysis and corrosion.
Victrex has solely focused on the development of PAEK-based solutions for more than three decades and consequently been able to partner in the automotive, aerospace, energy, electronics and medical industries with leading companies around the world.
Further information is available online at http://www.victrex.com/ae250. Visit us at the CAMX (booth ZA92) in Dallas, TX on October 27-29, 2015 or the Aircraft Interiors Expo (booth 205) in Seattle, WA on November 4-5, 2015.
*PAEK, Polyaryletherketone, a family of high-performance thermoplastics, such as VICTREX® PEEK
About Victrex plc
Victrex, headquartered in the UK, is an innovative world leader in high performance polymer solutions focused on the Aerospace, Automotive, Electronics, Energy and Medical markets. Every day, millions of people rely on products or applications which contain our polymers, from smartphones, aeroplanes and cars to oil & gas operations and medical devices. With over 35 years’ experience, we are delivering leading edge solutions to shape future performance for our customers and our markets, and to drive value for our shareholders. Find out more at http://www.victrex.com
Christopher Myslinski, Victrex plc., http://www.victrex.com, +1 484-342-6019, [email protected]
Share this article