New Dual-Mount Sinks Now Offered by MR Direct
Toledo, OH (PRWEB) October 30, 2015 -- Several months ago, a new line of economical stainless steel kitchen sinks was introduced by MR Direct. Today it is being announced that two additional models – the MX346DM and the MX3121LDM – are making their official debut into the collection. What makes these newest sinks unusual is that they can be installed either over or under the countertop, a feature not frequently found in today’s sink stylings. The perimeter edges of these models are smooth and beveled making them both attractive and functional when installed in a traditional top-mounted fashion; yet they are flat enough to allow the sink to be mounted in a contemporary under-the-counter manner as well.
The MX346DM is an irregular-shaped, single-bowl style with its left half deeper front-to-back than its right. A 3 1/2″ drain is centerset in the larger left side while the shorter right area allows for a flat steel ledge along the back. The MX3121LDM is a double-bowl design, similar in overall shape to the MX346DM, but with a recessed divider between the two sides. The 3 1/2″ drains are offset. Both models have a pre-drilled faucet hole centrally located in the back ledge, and both require a minimum cabinet size of 33 inches.
As with all the models in this line, these newest additions are manufactured in North America, using premium 300-grade, cold-rolled stainless steel. Their beautiful brushed satin finish is not only attractive, but tends to mask any minor scratches which might occur over time. With a durable industry-standard 18-gauge thickness, sound-dampening pads on the exterior to reduce noise, and full insulation to prevent condensation -- these sinks deserve consideration in most any kitchen décor plans.
Cutout templates and installation hardware items are provided in order to make the sink setup as simple as possible. With a cUPC certification and the MR Direct Limited Lifetime Warranty, the superior quality of these products is assured. Watch for more information about these and all MR Direct sinks at http://www.mrdirectint.com.
Paul Best, MR Direct International, http://www.mrdirectint.com, 1-877-946-5725, [email protected]
Share this article