...easily adjustable and can be placed close to the source of the lathe dust and debris, so it out-performs commonly used large dust hoods.
Medina, MN (PRWEB) November 12, 2015
Rockler Woodworking and Hardware has developed the Dust Right Lathe Dust Collection System, a dust collection solution for lathes that captures dust and fine shavings from spindle turning projects more effectively than large lathe dust hoods.
"The new Dust Right Lathe Dust Collection System is unlike anything else on the market," said Steve Krohmer, Rockler's vice president for merchandising and proprietary. "It's easily adjustable and can be placed close to the source of the lathe dust and debris, so it out-performs commonly used large dust hoods."
The system includes an innovative scoop-shaped polymer dust port that's mounted to an adjustable boom arm. The boom arm pivots on a steel post and can be raised or lowered along a 15-inch range, and the dust port — which is 9 inches long and has an inside diameter of 2-3/4 inches — swivels backward and forward on the arm for positioning close to the workpiece. The scoop shape allows the port to partly surround the spindle to capture dust and fine shavings that otherwise might be breathed in.
"The dust scoop can be positioned low on the workpiece while finish cuts are made to small turnings," Krohmer said. "Then, for sanding, it can quickly be repositioned a little higher to allow plenty of space without sacrificing performance."
To enhance adjustability, the post is attached to a 1/4-inch-thick slotted steel plate that easily mounts to the lathe with a knob and a stepped washer that fits under the bed stays. The slot in the steel plate allows for in-and-out adjustments, and the plate can be rotated and locked in at any angle. The included FlexForm™ hose attaches without clamps to the dust port and extends to a bracket and a hose clamp on the steel plate for connection to any dust hose with a 2-1/2 inch outside diameter fitting.
Except for the hose bracket clamp, all adjustments are made with easy-to-turn knobs, so no other tools are required.
The Dust Right Lathe Dust Collection System (52981) is priced at $49.99 and can be purchased at Rockler.com or Rockler Woodworking and Hardware stores nationwide, as well as through the Rockler catalog. For store locations or a free catalog, visit http://www.rockler.com or call 1-877-ROCKLER.
About Rockler Woodworking and Hardware
Celebrating its 61st year as a family-run business, Rockler Woodworking and Hardware is the nation’s premier supplier of specialty hardware, tools, lumber and other high quality woodworking and do-it-yourself products. Rockler has 31 retail locations in AZ, CA, CO, FL, GA, IL, IN, MA, ME, MI, MN, MO, NH, NY, OH, OR, PA, TX, WA, and WI, as well as extensive catalog and internet operations.
To learn more about Rockler, please visit http://www.rockler.com or call 1-877-ROCKLER.