American Electronic Components Announces: The Ultra-Small Safety Relay by ELESTA that meets EN 50205 requirements.
Elkhart, IN (PRWEB) March 22, 2016 -- AEC announces the ULTRA-SMALL SIS212 ELESTA Safety Relay. Despite its small size this safety relay meets EN 50205 requirements, and should be used wherever people or property must be protected and where a monitored contact is required.
The ELESTA SIS212 SAFETY RELAY measures a tiny 29.2 x 16.6 x 16.2mm (l x w x h) and satisfies the demand for smaller components. All contacts are designed for a nominal switching capacity of 250Vac at 6A (AC-1) and the contact material is well-proven AgCuNi + 0.2-0.4mm Au, permitting reliable switching of small control signals of a few milliwatts up to a maximum of 1500VA. The contact material is well-proven AgCuNi + 0.2-0.4mm Au, permitting reliable switching of small control signals of a few milliwatts up to a maximum of 1500VA.
The ELESTA SIS212 Ultra-Small Safety Relay has category III over voltage protection and is offered with all common coil voltages between 5 and 110, with standard 0.6W or sensitive 0.4W coils. A safe electrical separation exists between control and output side. The SIS 212 Coil and control contacts are separated from the two output contacts by double and reinforced insulation, with clearance and creepage distances > 8mm.
ELESTA is the world’s foremost manufacturer of high quality forcibly guided relays, designed for safety critical applications and public protection. Typical application areas for SIS212 include: light curtains, foot mats, railways, elevators, and frequency changers. AEC offers ELESTA’s full line of forcibly guided contact safety relays which comprise 24 separate relay series, capable of switching currents from 3mA to 16A and can offer up to 10 contacts in a single relay. All ELESTA Relays are RoHs compliant and carry UL, cUL and TÜV approvals. All ELESTA Relays are RoHs compliant and carry UL, cUL and TÜV approvals.
Founded as DURAKOOL® in 1935, AEC provides solutions to customers by designing, manufacturing and supplying components and systems to the electrical and electronic marketplace across the globe.
Specialists in switching, sensing and hermetic seal solutions, the company has a wide portfolio of technologies and over 75 years of applications, knowledge, and experience. AEC offers in-house engineering capability and a production facility for rapid prototyping of custom parts. AEC is well equipped to develop products matching your customer specific application requirements. AEC is ISO 9001 and ISO 14001 Certified.
AEC Product Line Includes: HERMASEAL glass to metal seals, DURAKOOL relays, push buttons, position sensors, G-force sensors, acceleration switches, inclination sensors and switches. Our creative engineering team has extensive experience in harsh environment packaging concepts. We offer high-quality products that are positioned to support the most challenging applications.
Bruce Finke, American Electronic Components, http://AECSENSORS.COM, +1 574-295-6330, [email protected]
Share this article