New at Summit Racing Equipment: QA1 Carbon Fiber Driveshafts

Share Article

Summit Racing now carries QA1 Carbon Fiber Driveshafts. Made from an exclusive 3M™ Matrix Resin, the driveshafts are stronger and lighter than aluminum shafts, so they last longer and can handle more torque.

Summit Racing now carries QA1 Carbon Fiber Driveshafts. Made from an exclusive 3M™ Matrix Resin, the driveshafts are stronger and lighter than aluminum shafts, so they last longer and can handle more torque.

QA1’s precision assembly techniques promote uniform wall thickness, which ensures shaft stability at high RPM. Thanks to their light weight and low inertia, QA1 carbon fiber driveshafts accelerate faster than similar steel counterparts.

Each QA1 carbon fiber driveshaft endures a series of rigorous tension, strength, and compression evaluations. Thorough harmonic testing suppresses negative noise, vibration, or harshness characteristics. The driveshafts are finished with maintenance-free, high-strength Spicer Life Series U-joints for superior durability.

Perhaps most importantly, QA1 carbon fiber driveshafts have an inherent safety feature. In the rare event of a failure, the driveshaft will shred apart, potentially preventing catastrophic damage to both the car and driver.

QA1 carbon fiber driveshafts are available in several lengths, with or without a high performance slip yoke. QA1 offers 3.2 inch O.D. driveshafts from 35.5 to 39 inches long, ideal for street cars and certain race applications.

QA1 recently introduced a line of 2.25 inch O.D. driveshafts specifically tailored for Crate Late Model and Dirt Modified racers. These driveshafts have been extensively tested on the track, earning a perfect safety record and several track wins in the process. They’re available in 29 to 39 inch lengths.

Summit Racing Equipment
http://www.SummitRacing.com
1-800-230-3030

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Alan Rebescher
Summit Racing Equipment
+1 (330) 630-0270 Ext: 7406
Email >