Uniweld's New Fast-Flo® Hose Set With EZ Turn® Fittings Is Now Available Through Uniweld Distributors.

Share Article

The wait is over, get your Uniweld Fast-Flo® Hose Sets today! Available in 5 (EZF5HS) and 6 (EZF6HS) foot sets.

Packaged

Fast-Flo® Hose Set

The built-in EZ Access “T” Fitting® provides convenient micron gauge connection and simplified hose purging!

Uniweld's Fast-Flo® Hose Set is comprised of a 3/8″ charging and vacuum hose with full flow ball valve shutoff, plus (2) 3/8″ x 1/4″ tank adaptors that produce more than 3 times faster vacuum than standard 1/4″ hose, red & blue hoses, and an EZ Access “T” Fitting® for micron gauge connection built into the blue hose.

The Fast-Flo® hose set includes a red EZ Turn® Hose, a blue EZ Turn® Hose with an EZ Access “T” Fitting® built into the middle of the hose for convenient micron gauge connection and simplified hose purging, a 3/8″ charging and vacuum hose with a full flow ball valve shutoff for more than 3 times faster evacuation of a system than a standard 1/4″ hose, plus two 3/8″ x 1/4″ refrigerant tank adaptors. The EZ Turn® fittings prevent refrigerant burns and make it easy to connect to the AC system while under pressure. Uniweld's Fast-Flo® Hoses are available in 5 (EZF5HS) and 6 (EZF6HS) foot set.

When connecting a standard hose nut to an access fitting, the valve core is depressed and the pressure from the system is released, spraying harmful refrigerant directly onto the technician’s hand and many times causing finger burns. This extreme pressure pushes back on the nut and causes a large amount of friction between the threads, making the nut very difficult to fully seat against the access fitting and provide unrestricted flow. Many times pliers are required to turn the nut and complete the seal. The EZ Turn® Anti-Blowback fitting has a thrust bearing that reduces friction so the service hose can be easily connected to the access fitting while under pressure. This becomes extremely useful when working with a high pressure 410A system.

Uniweld's Fast-Flo® Hose Set is standard with Uniweld’s USMAN5 Digital Manifold as well as with the USFM5EZ (also available in 6 ft. USFM6EZ) Spirit Manifold.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Frank Vargas
Uniweld Products, Inc.
+1 (954) 584-2000 Ext: 1216
Email >
@UniweldProducts
Follow >
Uniweld Products, Inc.
since: 04/2013
Like >
Follow us on
Visit website