Telewave ANT160-225F2 Base Antenna for the Railroad Industry (North America 159.570-225.000 MHz)

Share Article

Telewave, Inc., a leading provider of premium quality domestic and international radio and wireless systems equipment, announces a rugged fiberglass collinear antenna, the ANT160-225F2 for railway applications.

Telewave ANT160-225 Mounted on a Wooden Pole

The ANT160-225F2 is a wide band VHF antenna that covers from 159.570 MHz to 225 MHz. This antenna supports railroad deployments using the conventional 159.810 MHz to 161.610 MHz Yard and Road frequencies, as well as the newer Positive Train Control (PTC) frequencies from 220.1275 MHz to 221.7675 MHz; essentially creating a “dual band” antenna. This antenna also features an omnidirectional horizontal pattern, a wide vertical pattern with a moderate gain of 2.5 dBd.

No ground plane is required; these antennas can be mounted on a metal tower, wooden pole (seen on the right), or on top of a building. The antenna is suitable both on the Road (trackside mounted) as well as in the Switchyard. This antenna also covers the 1.25 Meter Amateur Radio (HAM) band from 219 MHz to 225 MHz.

The Telewave Collinear Antennas are rugged and suited for most environments. The horizontal pattern of these antennas is omnidirectional. The vertical pattern varies depending on the antenna gain.

All Telewave Collinear Antennas are manufactured in “Silicon Valley California” and are constructed with brass and copper elements that are soldered together; producing both a DC path to ground and prevention of internally produced intermodulation products. The “Cool Blue” fiberglass radome provides maximum protection from corrosive gasses, ultraviolet radiation, icing, salt spray, acid rain, and wind-blown abrasives. Dust and water intrusion shielding is equivalent to an “Ingress Protection” IP24 rating. The DC path to ground improves the survivability of a nearby lightning strike.

All Telewave Collinear antennas come with a clamp kit that facilitates mounting the antenna to a tower arm mast, or to the top of a tower. The default coax connector is N-Female.

The Telewave Collinear antenna models have two options; options must be specified at the time of order:

    -Inverted Mounting - Installation of the antenna “upside-down” or below the tower arm
    -DIN-Female (7/16) - Feed Line connector

Details regarding this “dual band” railroad specific antenna, or any other Telewave products, can be found in the data sheets located on the Telewave website.

For more information about Telewave's line of rugged, collinear base station antennas, please visit this page.

About Telewave:
Telewave designs and manufactures high quality RF system products. It serves wireless system operators, public safety providers, local and state governments, and federal agencies in the United States and internationally. The company was founded in 1972 and is based in San Jose, California. Telewave strives to be the premier supplier of seamless interoperable communication systems that provide security and reliability in mission critical eco-systems for both commercial and military applications worldwide. Telewave products are used by more than 7,500 equipment and network manufacturers and government agencies throughout the world.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Marlowe Milo
Telewave Inc.
+1 408-929-4400 Ext: 136
Email >
@Telewaveinc
Follow >
Visit website