National Fleet Products’ ArtLift Hoists up to 440 Pounds, Then Flips Vertically to Store Inside Rear or Side Doors

Share Article

ArtLift by National Fleet Products, is perfect for loading and unloading heavy or unwieldy cargo, and eliminates the problems associated with hydraulic and pneumatic lifts

ArtLift, ArtLift cargo lift, ArtLift box lift

The system’s compact design fits delivery vehicles of all types and is particularly well suited to vans and small box trucks.

The ArtLift is extremely versatile and will serve the typical cargo loading and unloading needs of the vast majority of delivery vehicles. – Steven Peterson

National Fleet Products, a leading North American supplier of cargo lifting equipment, loading ramps and other aftermarket accessories for commercial vehicles, announced the introduction of its new ArtLift. The powerful yet compact ArtLift cargo-lifting solution is available now and will be on display in booth 409 at the 2018 NTEA Work Truck Show in Indianapolis, Ind.

Compared to hydraulic or pneumatic systems, the ArtLift is extremely lightweight, but it boasts a 440-pound lifting capacity that accommodates more than 98 percent of common freight. A powerful 12-volt electric motor provides the needed torque to smoothly rotate a worm gear that effortlessly lifts appliances, furniture, industrial equipment, and a variety of other conventional and unconventional cargo items to a height of up to 3.28 feet.

“The ArtLift is extremely versatile and will serve the typical cargo loading and unloading needs of the vast majority of delivery vehicles,” Steven Peterson, president of National Fleet Products, said. “It also enables awkward, difficult-to-manage freight and carted items to be handled without tipping or navigating truck-mounted ramps.”

The system’s compact design fits delivery vehicles of all types and is particularly well suited to vans and small box trucks. When not in use, its 33- by 29.52-inch lift platform flips vertically to slide inside the vehicle, away from weather and road debris. At just 11.81 inches, the ArtLift stores flat against sidewalls and bulkheads or behind front seats and occupies about the same amount of space as a hand truck.

The ArtLift’s large diamond-plate platform provides ample traction for loading and unloading cargo in moist or inclement weather. The platform’s beveled edges make it easy to roll on loads using dollies, pallet trucks, carts and any equipment with rollers. The vehicle-side platform edge folds vertically 90 degrees to form a backstop that prevents payloads from traveling during the lifting process.

Up and down buttons control the lift action, and little training is needed compared to hydraulic and pneumatic liftgates that mount on the exterior of vehicles, are exposed to the environment, and are notorious for maintenance problems and high repair costs. The ArtLift is easy to maintain, requiring just one simple annual service procedure.

“The ArtLift is compact, lightweight and easy to maintain and is the intelligent alternative to hydraulic and pneumatic liftgates,” Peterson said. “When you consider its low cost of entry, its ease of operation, its simple maintenance requirements, its powerful lifting capabilities and the broad range of cargo it can manage, there’s nothing else that compares to the ArtLift’s ROI.”

The ArtLift weighs less than 200 pounds and is easy to install. The ArtLift is designed to fit virtually any commercial with a deck height of 39.37 inches or less.

Parties interested in scheduling a demonstration of the ArtLift cargo-lifting solution may contact National Fleet Products directly by calling (763) 762-3451 or by sending an email to sales@nationalfleetproducts.com. The ArtLift is in stock now and available in the United States and Canada through the company’s extensive distribution network of convenient distribution locations. Please contact National Fleet Products to locate a distributor near you.

To access high-resolution product images of the ArtLift cargo-lifting solution, please visit https://www.nationalfleetproducts.com/hoist-media-links.

To view a video of the ArtLift cargo-lifting solution, please visit https://www.youtube.com/watch?v=p5VQ9_-w_ic.

About National Fleet Products
National Fleet Products is a leading North American supplier of aftermarket accessories for commercial vehicles, including loading ramps, vehicle-mounted hoist systems, ladder racks, truck and trailer fenders, exterior vehicle security locks and suspension assist spring kits. The family-owned company serves as a North American master distributor for renowned European product lines such as Jonesco Plastics, WM Systems, MAD Tooling and Serrature Meroni. The company serves the United States and Canada through its extensive distribution network. Learn more at https://www.nationalfleetproducts.com.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Rick Ashley
OctaneVTM
+1 317-920-6105
Email >
@OctaneVTM
Follow >
Visit website