Hydro Engineering Designs High Capacity Soap Foaming and Chemical Mixing System
SALT LAKE CITY (PRWEB) June 12, 2018 -- Cleaning, sanitizing and disinfecting are all enhanced by applying the respective products via a foam application system. Delivering chemical as a foam extends dwell time, makes chemistry more effective and can reduce the amount of chemicals used. Almost all chemical products require mixing prior to applying.
Hydro Engineering's new 2/1EF Hydrofoamer offers a new approach applying foam with several features not found in other systems.
1. 2/1EF includes one or two high volume chemical pump (s) with infinitely variable volume control to provide chemical mixing on board. Mix ratios up to 2 to 1 (water to chemical) can be attained.
2. Chemical flow meter(s) assure dose rate accuracy.
3. Single 3/8" X 50' discharge hose is standard. 75' and 100' discharge hoses are available.
4. Pulling the trigger on the gun/wand assembly automatically starts the 2/1EF.
5. Fresh water flush function allows chemical to be quickly purged from all discharge lines and insures no chemical build up in any lines, guns or discharge nozzles.
6. Trigger control of foam discharge with wide angle, long throw foaming nozzle.
7. System is stackable. Up to four units high to conserve space in equipment rooms.
The Hydrofoamer was designed initially for equipment room installations. Designed for multiple cleaning, sanitizing or disinfecting requirements to be provided from a central equipment room and plumbed where required. 2/1EF delivers thick rich foam at a safe low pressure. No compressed are is required. A water supply and 110 Volt (220 Option), are the only utilities required.
Alan McCormick, Hydro Engineering, Inc., http://www.hydroblaster.com, +1 801-972-1181 Ext: 100, [email protected]
Share this article