Alliance axleWEIGH In Motion Truck Scale weighs individual axles by simply driving over the scale at ~3 MPH and also calculates total vehicle weight.
CANTON, Mass. (PRWEB) June 12, 2018
Alliance Scale, Inc. has introduced a new truck scale that will dynamically weigh each axle and print a receipt with individual axle weights and the total without requiring a driver to stop.
The Alliance axleWEIGH In Motion Truck Scale weighs individual axles by simply driving over the scale at ~3 MPH and also calculates total vehicle weight regardless of truck length or configuration. Easy to use, a driver stops at the controller, enters their known tare weight or truck I.D. to recall a stored tare weight in a single pass, or can use two-pass weighing and the controller will calculate the gross, tare, and net values.
Featuring factory calibrated load cells and a preprogrammed indicator, the Alliance axleWEIGH In Motion Truck Scale yields better than ±0.5% repeat-ability on average. Preconfigured for easy installation, these dynamic weighing truck scales can be installed on a gravel driveway, eliminating the need for costly ramps. Suitable for a variety of applications, the controller can provide a CSV file with job numbers for every transaction.
The Alliance axleWEIGH In Motion Truck Scale is priced from $19,995.00, depending upon configuration.
For more information contact:
Alliance Scale, Inc.
Raymond A. Secour, Jr., Marketing
1020 Turnpike Rd. / P.O. Box 509
Canton, MA 02021-0509
(800) 343-6802 FAX (781) 828-9510