Larson Electronics Releases an Explosion Proof UV Light with 15’ Cord and Explosion Proof Plug

Share Article

With over 40 years as a leader in the industrial and commercial lighting industry, Larson Electronics continues its commitment to providing high grade lighting equipment to specialty markets with the release of a 34 watt two foot, two lamp ultraviolet explosion proof light equipped with a fifteen foot cord and an explosion proof cord cap.

Two Foot, Two Lamp 34 Watt Ultraviolet Light Fixture

Larson Electronics releases an Explosion Proof UV Light with 15’ Cord and Explosion Proof Plug

We have equipped this fixture with 15’ cord and an explosion proof cord cap for those applications where hard wiring is not ideal.

The EPL-24-2L-UV-EYM-15C-EPP explosion proof ultraviolet fluorescent light fixture from Larson Electronics is US and Canada approved Class 1 Division 1, Class 2 Division 1 and uses a special ballast and bulb combination to produce ultraviolet light. This fixture has a T6 temperature rating and is ideal for hazardous locations where UV lamps are used to cure coatings and adhesives or as a germicidal agent. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum coated with a high gloss reflective finish. This fixture can be customized with UVA, UVB, or UVC bulbs to produce the appropriate wavelength of light for a specific application. These fixtures come standard with surface mount brackets to attach to the ceiling, wall, or any flat surface. Surface mounted fixtures come with a bracket cinched to a mounting peg on each end of the fixture. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The bracket is mounted via a single bolt hole at the top of the bracket. Once the brackets are mounted to a surface, the light can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. These fixtures are also available for pendant mounting upon request. This fixture is equipped with a seal off and 15’ of 16/3 chemical and abrasion resistant cable terminated in an explosion proof cord cap for complete protection in hazardous areas.

“Ultraviolet lights are ideal for curing coatings and adhesives, pest management, and in germicidal applications,” said Rob Bresnahan with Larsonelectronics.com. “We have equipped this fixture with 15’ cord and an explosion proof cord cap for those applications where hard wiring is not ideal.”    
Larson Electronics produces a full range of industrial and commercial lighting equipment, telescoping light towers, explosion proof lighting, and LED work lights. To view Larson Electronics line of industrial grade lighting solutions, visit them on the web at Larsonelectronics.com. You can also call 1-800-369-6671 to learn more about all of Larson Electronics’ lighting products or call 1-214-616-6180 for international inquiries.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Rob Bresnahan
Larson Electronics LLC
since: 01/2013
Like >
rob bresnahan

Follow us on
Visit website