Protective Packaging Provides Custom Outdoor Cover for Backup Transformer
Carrollton, TX (PRWEB) November 07, 2013 -- Protective Packaging Corporation recently worked with a Texas power plant to preserve a backup transformer. Power plants usually have a backup transformer on site to use in the event that the main transformer goes offline, needs maintenance, or experiences a catastrophic failure. These transformers are roughly 25 feet high, 20 feet wide and 40 feet long. Due to the size of these transformers, they are generally stored out of doors and close to the active transformer so they can be moved into place fairly quickly when needed.
The power plant stored their transformer on a concrete pad covered with a metal grate. After a few months, workers noticed dust and debris collecting on the transformer. Though this debris did not damage the internal workings of the machine, it would have to be cleaned off before the unit could be used. This buildup could cost precious time in the event of a power outage.
The company turned to Protective Packaging because they needed a cost effective solution to shield the transformer from the elements without having to relocate or otherwise move it. They also needed a solution that would come off easily and be reused if possible. Originally, the company had tried to shrink wrap the transformer, but winds in the area and the size of the unit made this task difficult to impossible.
This meant the solution had to be some kind of flexible material that could be easily attached to the transformer. Because this was Texas, the cover had to be made of a material that would not peel, crack, or otherwise deteriorate in the blazing summer sun or the occasional ice storm. “Ultimately, we recommended a heavy duty outdoor storage cover that would be attached to the transformer through the use of straps and buckles, to minimize debris build up, withstand high winds, and come off easily,” said Protective Packaging Senior Vice President, Jim Hiller.
“Once we had customer approval on the solution, we set to work to deliver their custom cover. The design consisted of several panels of UV proof ballistic nylon, designed to protect the transformer for at least 5 years,” Hiller said. “Our team then manufactured the cover to specifications, and dispatched packaging professionals to install the cover. We used a crane to position the panels around the unit, and workers secured the panels by tying them together with nylon ropes and fastening the buckles. Then the cover was fastened to the grate under the transformer using bungee type cords.”
About Protective Packaging
Protective Packaging Corporation produces barrier bags for corrosion prevention and static shielding during shipping and storage. With over 25 years of developing packaging solutions with the US military, Protective Packaging Corporation carries a wide range of mil-spec compliant barrier materials available in rolls, sheets, tubes and bags. The company’s packaging consultants assist customers in addressing all forms of packaging needs, from protecting cargo during shipment to preserving items during long-term storage. For more information on Protective Packaging Corporation, visit http://www.protectivepackaging.net.
Lucas Hanna, Protective Packaging Corporation, http://www.protectivepackaging.net, +1 817-919-8972, [email protected]
Share this article