Salvage Electronics Components with 3M Electronic Double Sided Tape 86220B

Share Article

3M Re-workable electronic adhesives, available to the US for the first time, are slit and die cut at Strouse.

There are no other practical methods...current non re-workable adhesives result in 100% scrap. - Mark Zabell, Account Executive for 3M EMMD

3M Electronics Markets Materials Division introduces 3M Electronic Double Sided Tape 86220B. This 3M Low Surface Energy (LSE) adhesive has a Polyamide Core (PAC) allowing a strong bond to most surfaces but with a stretch release mechanism for clean removal. This adhesive is mostly used in electronics applications for lens bonding and liquid crystal monitor (LCM) attachment. 3M 86220B has been extremely popular in the Asian markets and is now introduced to the US.

Salvaging parts poses a problem for manufacturers as they manage in-process design changes and returns. Typically, electronic components are extremely difficult to separate once bonded to the device and solvents are used to salvage these parts. The 3M PAC stretch release mechanism works similar to that of the popular 3M Command Strips which allows electronic components to be salvaged.

"Many solvents used to remove adhesive residue can harm many key components," says Mark Zabell, Account Executive for 3M Electronics Markets Materials Division. "#86220B eliminates the need for any solvent cleanup."

At Strouse the 3M 86220B can be die cut on a roll to specified dimensions for cell phones and display screens for medical and other electronic devices. The flexible polyamide carrier adds stability to the adhesive for accurate die cutting and slitting.

Strouse is a die cut adhesive manufacturer with over 25 years of industry experience. Serving the medical, automotive, military, appliance, and renewable energy industry, Strouse continues to innovate. With a quality management system currently registered to ISO 9001:2008 standards, Strouse not only has a commitment to quality but excellent customer service. A full team of design and development engineers allows Strouse to invest the necessary time and resources for each and every project. Located in Westminster, Maryland, Strouse can be contacted directly at 1-800-410-8273 or visit our website for more info at http://www.strouse.com.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Nick Zgorski
Follow us on
Visit website