Rugged by Design
Dättwil, Switzerland (PRWEB) June 19, 2018
The new µMAGBES switch comes as managed and unmanaged version and integrates 10 ports with 1Gbit. The rugged switch can be expanded in steps of 9 ports (19, 28,... ports). All ports are executed as lockable headers to meet application needs in various industries like railways, maritime, defense, or any rugged industrial environment. It is the perfect switch to build packaged solutions, regardless if RJ45, M12, or MIL-38999 connectors are needed. The solution can even be equipped with fiber ports. The open frame µMAGBES switch is extremely compact (115 x 75 mm). Hence it is the perfect solution to be customized and integrated in small places. All ports have status LEDs, showing the activity and speed of each port. The LED signals can also be accessed remotely. The same applies also for the reset switch and the default settings.
The input power requirement of the µMAGBES is 5-36VDC and the device uses less than 6W at full speed with 10 ports operational. The product can be operated in an environment of -20°C up to +60°C, and optionally -40°C to +85°C. The µMAGBES does not need to be cooled by a fan.
The µMAGBES product supports features such as ( but not limited too):
- Configurable via Web Interface (including SSL), Telnet, SNMP (incl. SNMPv3) or RS232
- Port-based and IEEE 802.1Q VLAN
- IEEE 802.1D Rapid Spanning Tree Protocol
- IEEE 802.1X MAC Address Checking
- Quality of Service
- Port monitoring
- Switch Statistics
- Digital diagnostic monitoring (DDM) according SFF-8472
- Firmware Update via HTTP or TFTP
- Down- and up-loadable configuration files in XML format
- IGMPv3 support
- Port trunking
These features, other functionalities and the flexibility make µMAGBES the ideal candidate for any robust, industrial and secure network application. Due to the low power consumption, robust and flexible design, the product is well suited for embedded systems and solutions. The µMAGBES is available as open frame solution as well as in configurations with RJ45 or M12 connectors (partially or all ports). All integrated in enclosures with DIN-Rail , flange, or 19" rack mounting. In addition MPL provides solutions with an IP67 MIL enclosure and MIL connectors of the customer choice.
The µMAGBES 10-port switch (HW & SW) is 100% designed and manufactured by MPL AG in Switzerland. This guarantees best quality, long-term availability, and longtime repair, and gives you security you can trust.
More information regarding the µMAGBES 10-port switch can be found on MPL’s website
About the Company
MPL AG is located in Switzerland and was founded in 1985. Since the beginning, MPL stands for robust designs, long-term availability, low power consumption, and fanless concepts. The products are designed from scratch to succeed in extended temperature and meeting the high demands of rugged environments.