New industrial ball valve and limit switch packages from Bonomi improve safety in industrial systems.
CHARLOTTE, N.C. (PRWEB) May 16, 2019
New industrial ball valve and limit switch packages from Bonomi improve safety in industrial systems, allowing critical manual valve applications to be monitored remotely. Limit switch feedback from the new manual valve packages provides control systems the ability to prevent automated valves or pumps from turning on or off if the manual valve is in the wrong position.
The carbon steel 600LL-LS2 and stainless steel 700LL-LS2 are full-port ball valves with a bracket-mounted NEMA 4, 4X limit switch containing two single-pole, double-throw mechanical switches (5A 125-250, 3A 24VDC). The valve and switch components together offer remote open or closed position indication.
The standard Bonomi LS2 limit switch features a die-cast aluminum housing protected from the elements by dichromate conversion and polyester powder coating and sealed with a BUNA-N O-ring. It is IP67 rated. NEMA 7 enclosure is optional. The LS2 comes standard with two ½” NPT cable entries and a NAMUR shaft ISO bracket.
The 600/700LL Series valves are available in sizes ¼-inch to 2 inches featuring an investment cast 2-piece WCB or CF8M body, blow-out proof stem design, self-adjusting stem packing and a thermal relief hole in the stem slot. A latch-lock handle is standard equipment.
Pressure rating for ¼-inch to 1-inch models is 2000 psi, while 1-1/4-inch to 2-inch models are rated 1000 psi or 150 psi steam. The operating temperature range is -4 degrees F to 450 degrees F.
For more information on Bonomi 600/700LL Series valve packages or other Bonomi products, contact Bonomi North America at (704) 412-9031 or visit online at http://www.bonominorthamerica.com.
Bonomi North America has served the U.S. and Canada since 2003 and is part of the Bonomi Group of Lumezzane, Italy. Bonomi Group brands include Rubinetterie Bresciane Bonomi (RB) brass ball valves and check valves; Valpres carbon and stainless steel ball valves; and Valbia pneumatic and electric industrial actuators. Bonomi North America maintains an extensive distribution network for these products from its headquarters in Charlotte, N.C. and a facility in Oakville, Ontario, Canada.