Creating a perfect stock finish that meets ASME B16.5 standards, this flange facer is offered with two interchangeable cross feeds for producing a smooth and stock finish on RF and FF gasket seats.
HOLLISTON, Mass. (PRWEB) August 22, 2018
Esco Tool has introduced an easy to use, manual flange facing tool that reconditions damaged raised- and flat-face flanges in the field to eliminate the need to cut and replace them.
The Esco FLANGE HOG 110® is a manually operated hand tool that re-faces damaged pipe flanges with a phonographic finish on-site and eliminates the need to cut and weld new flanges. Creating a perfect stock finish that meets ASME B16.5 standards, it is offered with two interchangeable cross feeds for producing a smooth and stock finish on RF and FF gasket seats.
Easy to setup and operate, the Esco FLANGE HOG 110® mounts to the flange I.D. in seconds with a clamping range of 0.9” to 10” and 0.005” alignment accuracy. It can rapidly machine flanges with a reach up to 14” O.D. and comes with straight and 90 degree tool bit holders. Cutting bits are two-sided and specially formed to cut through highly alloyed materials.
The Esco FLANGE HOG 110® is priced at $5,995.00 supplied as a complete kit with all necessary resurfacing components and is available for rent.
For more information contact:
A Unit of Esco Technologies, Inc.
Matthew Brennan, Marketing Director
75 October Hill Rd.
Holliston, MA 01746
(800) 343-6926 FAX (508) 429-2811