Infrasense conducted a non-destructive survey and report of various state highways in Vermont. A combination of survey methods including Ground Penetrating Radar (GPR) and Falling Weight Deflectometer (FWD) were utilized to provide the client with pavement layer thicknesses, moduli, and effective structural number.
STOWE, Vt., July 28, 2022 /PRNewswire-PRWeb/ -- Infrasense recently conducted pavement structure evaluations of multiple highways in Vermont. A vehicle-based Ground Penetrating Radar (GPR) survey yielded continuous pavement layer thickness data along prescribed offsets within the project sections. Supplementary to the GPR, Falling Weight Deflectometer (FWD) testing was performed at locations spaced 500-feet apart along the section limits, which provided the data needed to calculate pavement layer moduli and effective structural number. The results provided the client with valuable insights on the structural capacity and expected performance of these newly constructed pavement sections. Deliverables included tabular and graphical datasets with each point linked to precise GPS coordinates. These datasets help visualize how the constructed layers of the roadway change along the length of each lane.
The GPR data collection system was made up of a 1 GHz horn antenna and a SIR 4000 control unit, both manufactured by GSSI in Nashua, NH. The final report included a quantitative summary of average layer thicknesses in each lane, along with visual plots showing the sub-surface strata along the length of the section. The GPR pavement surveys are carried out according to ASTM D4748-10. The resulting data shows a cross-sectional slice of the pavement strata at various offsets. Each slice includes the surface, and any material change in the first few feet below the surface. The data is processed and analyzed using proprietary internally developed software specifically designed for pavement and bridge assessments.
The FWD equipment included a Dynatest Model 8200 trailer mounted system. Deflections were measured utilizing seven calibrated sensors spaced at specified offsets from the load cell. Testing was performed in accordance with ASTM D4694-09 (2020) and ASTM D4695-03 (2020) with load drops performed at a total of 1,389 locations across the project sites. All test locations were documented in terms of linear distance using a DMI, and with GPS coordinates.
Over the past 12 months, Infrasense has completed pavement structure evaluations across over 2500 miles of roadways in California, Connecticut, Georgia, Idaho, Indiana, Massachusetts, Maryland, Minnesota, New York, Oklahoma, South Carolina, Tennessee, Virginia, and Vermont. Infrasense methods have addressed a variety of pavement structures including asphalt over granular base, composite pavements, continuously reinforce concrete pavements (CRCP), jointed plain concrete pavements (JPCP), and jointed reinforced concrete pavements (JRCP).
About Infrasense, Inc.
Since 1987, Infrasense, Inc. has applied advanced technologies to address the most difficult challenges in subsurface scanning. Infrasense's engineers nondestructively extract critical information from a diverse range of structures. In addition to providing ongoing subsurface evaluation services to clients across the country, the firm has also conducted numerous research programs to advance the field of subsurface detection and nondestructive evaluation. To learn more about Infrasense and the services we provide, visit our website: http://www.infrasense.com
Media Contact
Lori McCormick, Infrasense, 781.281.1686, [email protected]
SOURCE Infrasense
Share this article