Laser Research Optics Has Introduced Beam Splitters Designed for 100 Watt Lasers and Higher

Share Article

A line of beam splitters for lasers from 100 Watts up that are designed for use at 45 degree angle of incidence and 10.6 microns has been introduced by Laser Research Optics.

Beam Splitters for 100 Watt lasers and up are offered in 3/4” to 3” O.D. sizes and various thicknesses.

Beam Splitters for 100 Watt lasers and up are offered in 3/4” to 3” O.D. sizes and various thicknesses.

Made from ZnSe with 'S' or 'P' polarization coatings to modify their reflectance, these laser beam splitters are marked with an arrow on the O.D. surface pointing towards surface “1”.

Laser Research Optics has introduced a new line of beam splitters for lasers from 100 Watts up that are designed for use at 45 degree angle of incidence and 10.6 microns.

Laser Research Beam Splitters for 100 Watt lasers and up are designed for use at 45 degree angle of incidence and 10.6 microns wavelength. Made from ZnSe with S or P polarization coatings to modify their reflectance, they are marked with an arrow on the O.D. surface pointing towards surface “1”.

Offered in 3/4” to 3” O.D. sizes and various thicknesses, Laser Research Beam Splitters are coated on surface “1” 50% ±3% reflectance and surface “2” has an anti-reflectance coat for 0.25% max. reflectance. Parallelism is 3 Arc minutes max., surface finish is 40-20 scratch-dig per MIL-O-13830, and flatness is 1/40 wave max. at 10.6 microns.

Laser Research Beam Splitters are stocked in popular sizes for immediate delivery and can be ordered online or by contacting the company.

For more information contact:

Laser Research Optics
A Division of Meller Optics, Inc.
Scott Rouillard, Sales Manager
120 Corliss St.
Providence, RI 02904
(888) 239-5545 FAX (401) 331-4004
e-mail: scott@laserresearch.net
http://www.laserresearchoptics.net

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Scott Rouillard
Visit website

Media

Laser Research Optics