New Affordable Bluetooth Data Acquisition Tool for Surface Mount Technology

Share Article

The new tool from Canadian Siborg Systems Inc is based on a Bluetooth model of the popular LCR-Reader-MPA All-in-One Digital Multimeter. The LCR-MPA-BT-Logger program determines if component meets preset specifications and grants pass/fail as soon as you touch the component. Test results can be readily exported to a spreadsheet.

LCR-Reader-MPA Bluetooth Data Acquisition Tool

LCR-Reader-MPA BT with LCR-MPA-BT Logger software record measured values, create custom test profiles and automatically grant pass/fail status to components

The LCR-Reader-MPA BT simplifies component testing by presetting multiple component profiles and then testing components with a single push of a button thus mitigating human error in assigning components Pass/Fail status.

A new model of the LCR-Reader-MPA offers Bluetooth connection enabling remote test data recording. The main feature of the tool is its’ LCR-MPA-BT Logger program that allows users to set specific test parameters for each component in the predefined list and then to automatically grant Pass/Fail status to the tested component.

LCR-Reader-MPA is the newest model in the LCR-Reader line of digital multimeters; this model features a 0.1% basic accuracy and wide range of features including 100 kHz test signal level, oscilloscope, AC/DC current measurement, easy open/short testing, and super cap testing to 1,000 mF. When the gold-plated tweezer probes are in contact with a component, either loose or mounted, the MPA will automatically determine the type of component and best test parameters. It will then test the component with 0.1% basic accuracy and display all measured values and test settings on the display. LCR-Reader-MPA BT offers all the same functions and features as MPA while also offering Bluetooth connectivity.

The ability to test components with virtually no set-up makes component sorting much faster, but it becomes order of magnitude more efficient with the ability to automatically grant pass/fail status and record the test results into a spreadsheet. The automatic recording is the most useful for time-sensitive tasks, such as production lines and quality control. All measurement values can be exported to an Excel file for later analysis.

To use the LCR-MPA-BT Logger program, simply connect the BT dongle to PC, turn on the MPA and only then start the program and click Connect button to establish the connection. The program will show that the device is connected and is ready to make testing. The main display shows what is shown on the devices’ display: main impedance value, secondary value, signal test level, test frequency level, and equivalent circuit. This main section also allows users to change these basic test parameters right from the program; when they are clicked, a small pop-out menu shows the various settings for that parameter and enables editing.

The main feature of the program is the Pass/Fail assessment feature. Users can set custom profiles for each component in a predefined list (such as BOM); set the desired values for impedance values and test settings (frequency, signal level and circuit model) and measure components. The main display of the screen will turn red if the component does not meet the desired specifications. The values are also recorded into the rows below the main display, with the “Test” column turning red or green depending on the outcome. This is an invaluable feature for quickly sorting components for various tasks. Users can see if the component is a pass or fail with just a glimpse.

The Logger program allows for testing single components or multiple components. Single Component testing is best for testing the same type of component repeatedly. Simply set the desired values and test, pressing the space bar for each measurement to record.

The Multiple Component testing allows users to set various types of components with different desired values. This is best for setting a range of components for a full PCB. Users can name and set different values for Capacitors, Inductors and Resistors and measure accordingly by selecting the desired component from the list. Instead of recording a list of values like the Single Component testing, Multiple Component testing overrides the last measurement in the same row.

Currently the LCR-Reader-MPA BT works with PC and Android devices only. Recorded values can be used with various spreadsheets, such as Excel.

Siborg offers a range of test instruments for Surface Mount Technology, including their most prominent line, the LCR-Readers and traditional Smart Tweezers LCR-meter. They offer the basic LCR-Reader model which offers users a 0.5% basic accuracy and few features but with a lower price tag. They also offer pre-bundled task kits in their store which include a device and various accessories. The Kelvin Probe Connector kit is an extension for tweezers-based multimeters that can be used as a probe station allowing to test components larger than the tweezers’ spread.

The LCR-Reader Store offers all Siborg’s test equipment, accessories and parts; many are also available on Amazon sales channels in North America and Europe.

The new LCR-Reader-MPA BT model is only available from LCR-Reader Online Store and Taobao store of AI Rox company in Shenzhen, China.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Michael Obrecht
@LCR_Reader
Follow >
LCR-Reader
Like >
LCR-Reader

Visit website