New WORX 20-Volt, 4-Piece Combo Kit Is Holiday Bundle of DIY Joy

Share Article

A holiday gift of the new WORX® 20V Power Share 4-Piece Combo Kit – whether it’s for a newly aspiring handyperson or an old hand – will spontaneously elevate both the recipient’s pulse rate and level of project capabilities. Inside the tool bag are the WORX 20V Power Share Drill & Driver, WORX 3-3/8 in. WORXSAW®, WORX Reciprocating Saw and WORX Flexible LED Light.

The WORX 20V Power Share 4-Piece Combo Kit (WX943L) includes a 20V Drill & Driver, 20V WORXSAW, 20V Reciprocating Saw, 20V Flexible LED Light, two 20V, MAX Lithium, 1.5 Ah batteries and 5 hr. battery charger.

A holiday gift of the new WORX® 20V Power Share 4-Piece Combo Kit – whether it’s for a newly aspiring handyperson or an old hand – will spontaneously elevate both the recipient’s pulse rate and level of project capabilities. Inside the tool bag are the WORX 20V Power Share Drill & Driver, WORX 3-3/8 in. WORXSAW®, WORX Reciprocating Saw and WORX Flexible LED Light.

Most DIYers will reach right away for the WORX 20V Power Share Drill & Driver. This user-friendly, cordless tool is compact and lightweight for comfortable handling, good maneuverability and easy access in tight spaces. Featuring a variable, two-speed control and plenty of torque, the drill & driver quickly dispatches everyday projects and repairs, such as installing brackets and hardware, drilling holes for drywall anchors, replacing door sets and hinges, assembling furniture or building garage storage units.

The cordless drill & driver has a two-speed gearbox with no-load speeds of 0-350 and 0-1350 rpm. Its clutch ring provides 15+1 positions to adjust torque settings, with maximum torque of 265 in.-lbs. The tool’s drilling capacity is 1 in. in wood and 3/8 in. in steel.

The compact drill & driver has a comfortable, rubber overmold grip. Its 3/8 in. keyless chuck allows fast bit changes. A built-in LED light illuminates the work area when the trigger is pressed and incorporates a low-battery indicator.

WORXSAW is sure to lift holiday spirits, as well. The compact circular saw weighs only 4.1 lbs., including battery, and has a slim, inline grip. This allows comfortable, one-hand operation, especially when cutting overhead.

WORKSAW’s narrow base plate permits cutting in spaces that are too tight for standard, 7¼ in. circular saws. Its left-sided blade design provides unobstructed cut-line visibility.            

WORXSAW has a 3-3/8 in., thin-kerf blade that’s less than half the thickness of a 7¼ in. circular saw blade. This smaller, thinner blade improves efficiency by reducing cutting resistance with less motor strain. The saw’s no load speed is 2300 RPM.

The compact saw’s depth-of-cut is 1-11/16 in., making it ideal for making quick and precise cuts, including plunge cuts, in 1-by lumber. A depth-of-cut knob is turned to raise or lower the blade in 1/8-in. increments.

The cordless saw also features a dust extraction port with vacuum adapter attachment and a parallel edge guide to set up accurate rip cuts. It also comes with a 24T carbide-tipped blade and hex key.

The WORX 20V Reciprocating Saw provides the gift of faster, less strenuous remodeling/demolition work, and more. The cordless saw weighs less than 6 lbs. and is highly maneuverable. By simply changing blades, it cuts through wood, metal, PVC pipe, drywall, tree branches, and tile and stone. The reciprocating saw has a 7/8 in. blade stroke and a cutting capacity of 7 in. in wood; 3 in. in PVC; and 15/32 in. in steel.

The 20V Reciprocating Saw features convenient tool-less blade changes, so it’s easy to quickly move from one project to another. The saw also has three pendulum (orbital) mode settings, ranging from fine/detail sawing to aggressive cutting for demolition or pruning. Its pivoting foot plate is adjustable and provides a large contact surface area for stability and control.

The variable speed reciprocating saw delivers 0-3,000 no-load strokes-per-minute (spm). A lock-off switch prevents accidental startups and an LED light helps illuminate the work area. The saw’s rubber grip handle provides optimal comfort and control.

The WORX 20V Flexible LED Light rounds out the combo kit. This multi-purpose, LED work light with flexible gooseneck shaft easily fits into confined spaces and provides up to 100 lumens for up to 15 hrs. on a single charge. Its flexible shaft bends in numerous positions and brings light as close as possible to the work area. It also can be hung above the work area with a provided nylon reinforced hook that snaps onto the shaft.

The WORX 20V Flexible LED Light is handy in workshops, garages, during power failures, camping or RVing, fixing flats and other road emergencies, and more.

The WORX tools in the 4-pc. combo kit are powered by a compact, 20V, MAX Lithium 1.5 Ah battery. As part of the WORX 20V Power Share program, these batteries also are interchangeable with all WORX 20V lawn and garden and DIY tools for cost savings and convenience.

The WORX 20V Power Share 4-Piece Combo Kit (WX943L, $149.99) includes a 20V Drill & Driver, 20V WORXSAW, 20V Reciprocating Saw, 20V Flexible LED Light, two 20V, MAX Lithium, 1.5 Ah batteries and a 5 hr. battery charger. The combo kit is available at worx.com and is covered by the WORX three-year limited warranty.

Reach out to WORX social media links, including Facebook: https://www.facebook.com/worxus?ref=hl; Twitter: https://twitter.com/WORXTools; Pinterest: http://pinterest.com/worxtools and Instagram: @WORXTools

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Mike Mangan
MKM Communications
847-255-1903
Email >
Visit website