Remee Wire & Cable Introduces New Vigilance™ Access Control Cables

Share Article

Remee Wire & Cable, a high-integrity manufacturer of electronic wire and cable for reliable performance, has added three new Access Control Cables to their line of Vigilance™ Security, Alarm and Control Cables. These composite cables feature a new low capacitance shielded cable and shielded plenum and riser-rated cables for outdoor use.

bundled cable, custom cable, outdoor cable, copper cable, plenum coax cable, alarm cable, shielded cable, fiber optic cable, single mode, multimode, gel filled, dry tube, plenum fiber optic cable, tight buffer fiber, loose tube fiber, fire alarm cables, multimedia cable, home automation cables, premise, premise cable, power over ethernet cable, 10 gigabit ethernet, plenum rated, security cable, LAN cables, PoE, PoE cables, PoE hybrid cables, power over ethernet, access control cables

Remee’s New Vigilance™ Access Control Cables

Remee’s new Vigilance™ Access Control cables feature dedicated components for the operation of card readers, door contacts, Request to Exit (REX) controls, and locking power/retinal scanners.

Remee's new Vigilance™ Access Control Cables have been engineered specifically for access control technologies, such as Weigand, the Open Supervised Device Protocol (OSDP) specification, and BACnet (a communication protocol for Building Automation and Control networks).

Weigand, the current access control technology, is not totally secure and can be potentially open for attack. On the other hand, OSDP with Secure Channel (an encryption and authentication scheme) does not have this potential vulnerability. BACnet was designed to allow communication of building automation and control systems for applications such as heating, ventilating, and air-conditioning control (HVAC), lighting control, access control, and fire detection systems and their associated equipment. The BACnet protocol provides mechanisms for computerized building automation devices to exchange information, regardless of the particular building service they perform.

Remee’s new Vigilance™ Access Control cables feature dedicated components for the operation of card readers, door contacts, Request to Exit (REX) controls, and locking power/retinal scanners. Remee’s composite cable constructions, manufactured in the factory, provide reliable and consistent performance and facilitate a quicker and easier installation.

Remee’s three new Vigilance™ Access Control Cables include:

1.    Direct Burial Composite for Wet Locations – Riser-rated
Four components cabled together with a water blocking tape and overall UV-resistant PVC jacket, suitable for wet locations.
PART NO. R00907WBTM1B; Component 1: 18/4, unshielded; Component 2: 22/6, OAS; Component 3: 22/2, unshielded; Component 4: 22/4, unshielded; Overall Black PVC Jacket, CMR.
See Spec Sheet

2.    Composite with Low Capacitance (RS 485) – Plenum-rated
In this new design, Remee has replaced the former 22AWG 6 conductor shielded component with a 22AWG 2 Pair Low Cap shielded component for use with OSDP and other card readers using encrypted transmissions. An overall foil shield is provided on this component for use in high EMI environments. Remee’s new Vigilance Access Control cable is Plenum-rated component cable is ideal for use with OSDP and other access control systems.
PART NO. 725953M1V; Component 1: 18/4c unshielded; Component 2: 22/2pr, OAS low cap cable (RS 485); Component 3: 22/4c unshielded; Component 4: 16/4c unshielded; Overall Purple Jacket with Remguard Plenum Polymer, CMP.
See Spec Sheet

3.    All Shielded Composite – Plenum-rated
This new Plenum-rated Access Control composite cable features a foil shield for each of the four component cables for maximum EMI protection in high noise environments.
PART NO. 725914M1O; Component 1: 22/6c, OAS; Component 2: 22/2c, OAS; Component 3: 22/4c, OAS; Component 4: 18/4c, OAS; Overall Blue Jacket with Remguard Plenum Polymer, CMP.
See Spec Sheet

Visit the Remee website for more information on Vigilance™ Security, Alarm and Control Cables.

Or for more information about Remee, visit their website or their Profile.

Ask A Remee Expert about your application questions.

About Remee Wire & Cable

Remee Wire & Cable is a world class manufacturer of electronic wire and cable, both copper and fiber optic cable. It’s Remee’s policy and mission to maintain high integrity in all facets of its business – engineering, material procurement, manufacturing and customer service. Our high standards are evident in the use of solid copper conductors and premier compounds.

The company is headquartered in Florida, New York, where its corporate offices, engineering and manufacturing facilities are all located. Since our beginnings in 1972, personal attention and care have been the hallmarks of the family-run company. Our engineering and manufacturing expertise have enabled our growing product offering and custom capabilities to a level that rivals some of the largest cable manufacturers. The large standard cable offering, along with expert capabilities to modify any standard cable or design and manufacture custom-made cables, are proof of our significant industry stature.

Remee features the quick decision-making, special customer care and access to executives, which are all associated with a family-run company. Yet, Remee offers a huge selection of cables and expert capabilities that rival the largest cable manufacturers. So, at Remee, customers enjoy our “dual personality” and the best of both worlds.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Steven Bork
Nova B2B Marketing
847-778-6468
Email >
Visit website