Worcester Polytechnic Institute Researchers Helping U.S. Military Optimize Mobile Manufacturing Labs; Could Enable Remote Units to Turn Waste Metal Into Replacement Parts

Share Article

The concept, being developed by researchers at WPI with support from the DoD, would increase unit readiness, making troops safer, more independent

WPI researchers pour molten metal into a preheated investment casting mold.

WPI researchers pour molten metal into a preheated investment casting mold.

“This could revolutionize the way we manage wartime operations, reducing our vulnerability in the field."-Jianyu LiangProfessor of mechanical engineering at WPI

Historically, replacement parts needed on remote military bases have been brought in on airplanes, ships, and truck convoys. It’s a costly and complicated supply chain that can take weeks or months between order and delivery. What’s more, the U.S. Army, Navy, and Air Force have issued reports citing their need to reduce operational vulnerability and improve effectiveness, while reducing waste. To help address these issues, materials scientists and engineers at Worcester Polytechnic Institute (WPI) are developing a manufacturing process that will enable the military to slash wait times for parts, increase unit readiness, reduce logistical operations and costs, and make deployed troops safer and more self-sustainable.

The Army’s Expeditionary Lab is a mobile, self-contained manufacturing unit. It is compact enough to fit into a shipping container or truck, and can easily and swiftly be moved to bases around the globe. Already in use in some remote military bases and positions around the world, the WPI research project will upgrade and expand its usefulness by making it easier and more efficient for units to reuse scrap metals already on hand—such as broken brake rotors or tire rims—in order to make critically needed replacement parts for everything from vehicles to medical equipment.

“This could revolutionize the way we manage wartime operations, reducing our vulnerability in the field,” said Jianyu Liang, professor of mechanical engineering and a co-PI on the project. “WPI’s research aligns with the Army’s need to be able to fabricate replacement parts from what would otherwise be wasted metal at or near soldiers’ point of deployment to ensure they are prepared at any time and in any theater.”

What’s more, the use of waste metal also minimizes the environmental impact of military operations by using up what otherwise would largely be discarded on site; all military installations create metal waste as a normal consequence of military operations—up to four pounds of solid waste per soldier per day, according to DoD estimates.

The WPI project began in 2019 when WPI and the Army Research Laboratory received a $1.15 million award from the Strategic Environmental Research and Development Program (SERDP), the environmental science and technology program run by the Department of Defense (DOD) in partnership with the Department of Energy and the Environmental Protection Agency. The WPI research team was tasked with creating a front-to-end agile manufacturing process that combines existing 3D printing technology, metal analysis equipment, and a casting process, in which ceramic molds of needed parts are formed around a plastic pattern that can be created with 3D printing. Scrap metal of the appropriate alloys is then melted and poured into the molds to create needed parts.

Optimizing the Expeditionary Labs with mobile foundries would make it possible for military units to reuse ferrous scrap (iron and steel), which makes up about 60 percent of all waste metal generated, as well as aluminum, which makes up another 30 percent anywhere at anytime.

“The project’s innovation is not about the tools,” said Liang. “It’s about creating a new process that can use existing tools and technology to create a mobile foundry that can rapidly produce a needed part. This innovation has the potential to change military logistics and modern manufacturing by combining multiple tools and processing stages that are typically carried out in separate locations and facilities into a single, integrated system that can be set up and operated in the field. Making it compact and safe within the space allowed in shipping containers is not a trivial task.”

Since the project began, researchers have used machine learning to analyze a database of steel casting processes (using liquid metals and molds to create parts) for the military; designed models to create new alloys from waste metals for anticipated spare parts; and created a compactable 3D-printing-enabled rapid-casting steel foundry that updates an age-old model for metal casting factories.

As part of the project, WPI researchers have been developing methods technicians in the field can use to determine which alloys are needed to make particular replacement parts, and to identify and extract those alloys from the scrap they have on hand. The technicians will be able to consult a metal blending model that was developed based on a growing database WPI researchers have created by analyzing scrap metal supplied by the military to detail the metallurgical composition of a wide range of the parts most commonly in need of replacement or repair.

WPI researchers also have employed machine learning to develop a process to prescribe the post casting heat treatment processes to pinpoint the needed mechanical properties for each replacement part being made.

“Our process has led to the creation of a manufacturing unit with a much smaller footprint than typical models,” said Liang. “It is compact, transportable, safe—and it complies with the power and water limits imposed by the SERDP program. Although we can’t predict what will need to be replaced, by bringing all of these technologies together we can create any part needed on the fly, and we can do it with scrap metal.”

The project is being led by Liang; Brajendra Mishra, Kenneth G. Merriam Professor of mechanical engineering and director of WPI’s Metal Processing Institute (MPI), and Diran Apelian, affiliate professor of WPI’s Metal Processing Institute—along with Richard Sisson Jr., George F. Fuller Professor of mechanical engineering and director of the Center for Heat Treating Excellence within MPI. Karl Sundberg, a PhD student and a graduate research assistant, and Sean Kelly, a postdoctoral research associate, have worked on the project. Brandon McWilliams, the lead for metallic additive manufacturing at the Army Research Laboratory (ARL), and Jian H. Yu, a materials engineer at ARL, are collaborators on the project, along with Robert De Saro, president and founder of Plainfield, N.J.-based Energy Research Company. Also working on the project are WPI PhD student Yutao Wang, who is studying manufacturing engineering; and Lily Wolf ’24, who is majoring in mechanical engineering.

The team has presented papers on its work at the DOD Steel Summit; the MS&T Conference; the Symposium on Recycling, Waste Treatment and Clean Technology; and the Strategic Environmental Research and Development Program (SERDP) and the Environmental Security Technology Certification Program (ESTCP) Symposium.

About Worcester Polytechnic Institute
WPI, a global leader in project-based learning, is a distinctive, top-tier technological university founded in 1865 on the principle that students learn most effectively by applying the theory learned in the classroom to the practice of solving real-world problems. Recognized by the National Academy of Engineering with the 2016 Bernard M. Gordon Prize for Innovation in Engineering and Technology Education, WPI’s pioneering project-based curriculum engages undergraduates in solving important scientific, technological, and societal problems throughout their education and at more than 50 project centers around the world. WPI offers more than 70 bachelor’s, master’s, and doctoral degree programs across 17 academic departments in science, engineering, technology, business, the social sciences, and the humanities and arts. Its faculty and students pursue groundbreaking research to meet ongoing challenges in health and biotechnology; robotics and the internet of things; advanced materials and manufacturing; cyber, data, and security systems; learning science; and more. http://www.wpi.edu

Media contact:
Andy Baron
Associate Director of Public Relations
978-235-3407 (cell) 508-831-5916

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Visit website