Davron Introduces New Continuous Conveyor Oven for Drying Lost Foam Castings
Chattanooga, TN (PRWEB) March 19, 2014 -- Davron Technologies, Inc. designed and manufactured a gas-powered continuous conveyor oven to dry moisture from slurry on ceramic filters manufactured in a lost foam casting process and used in aluminum manufacturing. With a 15-minute drying cycle, the DTI-223 continuous conveyor oven evaporates 1,121 pounds of moisture every hour. Typically, 190 filters per hour are processed through the oven and drying time can be adjusted depending on product requirements.
To dry the ceramic slurry, the DTI-782’s conveyor system moves products through three separate temperature-controlled zones on a polypropylene mesh belt. Each zone utilizes one full modulating natural gas burner, two circulation fans, and one exhaust fan. Each zone can be programmed to operate between 180ᴼF and 400ᴼF, with a maximum temperature of 450ᴼF. The conveying system utilizes a variable frequency drive (VFD) for speed adjustment, and the entire oven is controlled by a PLC.
The useable dimensions of DTI-223 are 3’2” wide x 0’6” high x 98’4” long. The continuous conveyor oven interior is made out of 16-gauge aluminized steel backed by four inches of eight-pound-density mineral wool insulation. The structural steel frame that holds the interior chamber is covered in 16-gauge carbon-steel and finished with high-temperature paint.
Davron designed the DTI-223 based on two criteria provided by the client: the amount of moisture to be removed from each filter and the production rate. Davron did extensive testing to determine the temperature profile needed to meet these requirements and used this information as the basis for the custom design of the DTI-223. Once the continuous conveyor oven was manufactured, Davron did acceptance testing and training with the customer at Davron headquarters in Chattanooga, Tenn., prior to shipment.
Visit http://www.davrontech.com for more information about Davron’s continuous conveyor oven capabilities. Or, if you’d like to discuss your own industrial oven project, please call Davron’s Vice President, Jimmy Evans, at (888) 263-2673, or fill out Davron’s online spec submission form.
About Davron Technologies, Inc.
Davron Technologies, Inc. custom fabricates industrial ovens, providing turnkey design and system integration services to develop thermal processing solutions. Davron is a total industrial oven manufacturer, creating custom industrial ovens and precision process equipment for every industry that requires thermal processing. Each Davron industrial oven is custom built according to customers’ unique specifications. As the Provider of Industrial Oven Solutions, Davron offers one of the largest selections of in-house and on-site industrial oven services in the world.
Courtney Wanamaker, Industrial Strength Marketing, http://www.marketstrong.com/, (615) 577-2015, [email protected]
Share this article