GEA to Show an Air Disperser for a Full-scale Spray Dryer at Anuga FoodTec
(PRWEB) February 18, 2015 -- GEA will be one of the main exhibitors at the Anuga FoodTec tradeshow in Cologne, Germany (24-27 March, 2015). At the tradeshow, GEA will be promoting its complete portfolio of technology and processes for the production of food and dairy powders.
One of the highlights at the show will be a full-scale GEA Niro Air Disperser type DDD. The Air Disperser is a key component in a spray drying plant and its performance is crucial for both product quality and plant efficiency. The DDD Air Disperser incorporates all the latest knowledge within spray drying and is designed using GEA’s proprietary CFD simulation tools. It is supplied with most new, medium and large-size GEA Niro Spray Dryers and has proved its reputation in more than 90 plants with capacities up to 30 tons/hour producing products such as milk powder, nutritional formulas and food ingredients.
Several cases have proved the efficiency of the DDD Air Disperser. It provides better control of the drying process - compared with other types of Air Dispersers - producing a more uniform product, and longer production runs between cleaning thereby reducing down-time. This has proved to increase the production capacity of spray dryers by up to 15-17%.
Designing the complete powder plant for continuous operation – by adding additional evaporation and feed systems – allows producers to take full benefit of the DDD Air Disperser’s production capacity. Gaining an additional 3-4 hours uptime every day, where the plant would normally be out of operation for cleaning, improves the overall plant output by 15-20%.
Also at the show will be some of the latest spray drying process monitoring and safety measures from GEA – including the GEA Niro POWDEREYE™ in-line powder analysis system and GEA Niro SPRAYEYE™ nozzle monitoring system – featured with the DDD Air Disperser. GEA will also be promoting its GEA Niro DRYCONTROL™ process control system for spray dryers. Building on real-time data and software based on Model Predictive Control technology (MPC), GEA Niro DRYCONTROL™ continuously assesses and compares current and predicted operational data with the desired results whilst setting new control targets to reduce in-process variability and thereby improve process performance. This system has already proved its value: by allowing the spray dryer to be operated closer to the maximum residual moisture content, yield is increased and the spray dryer’s capacity is fully utilized.
GEA will be in hall 9.1, stand A080 E089.
Steve Jordan, The Words Workshop Ltd - US, +44 1908 695500, [email protected]
Share this article