Oldham Adds a CO2 Detector to the OLCT 10N Line

News provided by

Oldham

Jun 09, 2015, 03:00 ET

Arras, France (PRWEB) June 09, 2015 -- Oldham is pleased to announce that it has added a CO2 detector to the OCLT 10N line

The OLCT 10N is a digital detector designed for commercial or industrial use in ATEX zone 2 environments or areas without explosion hazard classifications.

Designed to detect explosive gases (CH4, H2, C3H8 and C4H10), toxic gases (CO, NO, NO2, H2S and NH3) or oxygen, the OLCT 10N now includes an infrared sensor for detecting CO2 in three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol.

Associated with the MX43 controller, the OLCT 10N makes electrical installation easier with a fieldbus network that allows for up to 30 detectors to be connected on the same line!

The detector can be used for many different applications, according to which measurement range is selected:

  • Use of CO2 as an asphyxiating gas (0-100% vol. range),
  • Use of CO2 as a refrigerant gas (0-100% vol. and 0-5% vol. ranges),
  • Workplace safety (0-5% vol. range),
  • Air quality control (0-5000 ppm range),
  • Air exchange using CO2 to limit energy losses,
  • Etc.;

And in many different industries (respectively):

  • Slaughterhouses, automatic fire suppression systems,
  • Agrifood industries,
  • Breweries, Maturing cellars,
  • Laboratories, Hospitals, Nurseries,
  • Climate control, Greenhouses
  • Etc.

For more information, please contact your Oldham representative or send us an email at info(at)oldhamgas.com.

About Oldham SAS:
Oldham SAS has more than 100 years of experience in safety, gas and fire detection systems. Oldham SAS is headquartered in Arras, France, and is a subsidiary of Scott Safety, a company of Tyco Group. Oldham employs hundreds of people globally with operations in France, USA, China, India and Germany. Oldham’s mission is to be the best provider of fixed-point gas detection systems worldwide. Its wide range of application-driven products and expertise embody performance, quality and reliability. For more information, visit http://www.oldhamgas.com.

Industrial SafetyTechnologies (IST) was acquired by Scott Safety, a Tyco business, from Battery Ventures in March 2015. The combination of IST, a global leader in gas and flame detection, and Scott Safety makes Tyco one of the largest global designers and manufacturers of gas and flame detection products, and reinforces Tyco’s commitment to growing its gas and flame detection business.

Natacha Dequeant, Oldham, http://www.oldhamgas.com, +1 7249333331, [email protected]