Toronto, Ontario (PRWEB) June 30, 2013 -- A new member of the Smart Tweezers LCR-meter family, LCR-Reader has finally arrived with the first batch of devices being manufactured. The new device replaces previous model of Smart Tweezers ST5L production of which was stopped in June 2013. LCR-Reader, presented to the public last April is shown on the right. It is very similar to Smart Tweezers in the way it is used.
LCR-Reader is about two times lighter previous models of Smart Tweezers and smaller in size. It has high contrast LED screen instead of the previously used LCD. It is also uses Li-Ion rechargeable battery with a USB connector and has basic accuracy better than 1% . A new simplified design includes the only control button that turns the device on and switches measurement mode by a push of the button between Automatic, Capacitance, Inductance, Resistance, and ESR. Test frequency is automatically adjusted according to the component type and value, and test signal amplitude is 0.5 Vrms.
An example of LCR-Reader measurement display is shown on a picture. Here AM indicates the measurement mode (Automatic Mode). Similarly to Smart Tweezers, LCR-Reader in addition to the the main impedance component L, C or R it will also show the parasitics. Here Rs indicates parasitic series resistance of the inductor, 10 kHz is the test frequency, L indicates that the component type is an inductor, 104.8 uH indicates the inductance value, and in the left bottom corner of the screen the battery charge level is shown.
The following ST-5 features are no longer available:
Parasitic offset subtraction
Sorting of component
Diode/Continuity/Open Circuit test
The latest news at presented at Smart Tweezers Blog.
Be the first to own LCR-Reader, call today to pre-order and get 20% discount. A detailed comparison of features of the LCR-Reader and previous models is presented in the Smart Tweezers Comparison Table.
Automatic LCR and ESR measurement
Typical accuracy better than 1%
Best range selection
Li-Ion battery with a micro-USB connector
30 gram weight
About Siborg Systems Inc:
Established in 1994, Siborg Systems Inc. is a source of engineering software and hardware tools for semiconductor and electronics industry. Located in the city of Waterloo, Ontario, Canada, it enjoys being part of the local world-renowned high-tech community.
For more information: Siborg Systems Inc, 24 Combermere Crescent, Waterloo, Ontario N2L 5B1, Canada
Toll Free: 877-823-7576
Michael Obrecht, Siborg Systems Inc., http://www.smarttweezers.us, 519-888-9906, [email protected]