Weld Fixture Specialists Offers New Products to Manufacturers.
Waukesha, WI (PRWEB) July 24, 2013 -- On June 21, 2013 Rentapen Inc. added four New RAPid Blocks™ to their collection of six RAPid Blocks™. Rentapen Inc., located in Waukesha, WI, first developed RAPid Tooling Components™ in the year 2002.
The RAPid Tooling Component™ product line was inspired by Rentapen’s customers’ need for dramatic reductions in the overall design, set-up, and operation costs of welding and other tooling fixtures. Rapid Tooling Components™ (RTC) reduce the design cost of the fixture by eliminating the need to design, detail and check similar parts over and over again.
“We found that it was costing our customer $100 to design, check, cut, and create a block. We realized we could do it cheaper. With RAPid Tooling Components™, it now costs that customer about $37 for the same block and they don’t have to design and check it each time,” said Susan Straley, President and Owner of Rentapen. “Our product line saves time in the design and build of product part holding fixtures.”
The new RAPid Blocks™ are RB11, RB12, RB16, & RB19 and can be downloaded for free on Rentapen’s website. RAPid Blocks™ are standard yet versatile parts that are used with locating pins, rest pads, jig feet, and other parts in a weld fixture.
The new blocks are improvements to a now discontinued blocks; which was limited to only a 3/8 screw size. These improvements allow the customer to use any screw size (1/2, 3/8, ¼, & 5/16) needed to complete the design of the weld fixture.
The RB11 & RB16 is designed with two drill and counter-bored holes used to screw the block to the plate and one press fit hole to hold a dowel. In the front of the RB11 there is one round screw hole used for front and back shim adjustability. The RB16 is designed the exact same way but with one large difference. Instead of a round hole, it is designed with a slot for optimum side to side adjustability of up to ¼”.
The RB12 & RB19 is designed with three drill and counter-bored holes used to screw the block to the plate and two press fit holes to hold a dowels.
The RB12 and RB19 are designed to be longer, in order to locate other parts and to keep them square on the weld fixture. Similar, to the design of the RB11, the RB12 has round screw holes used for shim adjustability in 3 directions of up to 1/8”.
RB12 has two oversized holes; located at each end of the block. To solidly hole the subassembly against the RB12 but still is able to allow adjustments in the side to side and up and down directions. Rentapen created a weld fixture design lesson with slide show to explain better with images.
The RB19 is designed similar to the RB12 but it is designed with a two slots for additional side to side adjustability.
To provide their customers with the best price, Rentapen makes each RAPid Block™ when it is ordered. Keeping finished goods inventory costs low and passing on the savings to Rentapen’s customers.
Rentapen Inc., Weld Fixture Specialists is home of RAPid Tooling Components™ used in weld fixture design and build. Rentapen Inc, located in Waukesha, WI, has been providing machine tool design services to manufactures since 1976. Rentapen is a Certified Woman Owned Business and home of RAPid Tooling Components™.
Susan, Straley, Rentapen Inc., http://www.rentapen.com, 262-542-8891, [email protected]
Share this article